Table of Contents
Advertisement
For future reference, write down the model, serial number, and date of purchase for your dehumidifier.
This is extremely helpful if you need to seek assistance in the future. The data label on the side of your
unit has key characteristics of your specific unit.
Model Number: Horizon Titan XG60
Serial Number:
For additional questions concerning your dehumidifier, the following options are available:
• Contact your installing contractor
• Call Horizon Dehumidifiers @ (919) 258-3330x4
• Email:
sales@horizondehumidifiers.com
Power Supply: 115 V, 60 Hz AC, Single Phase
Outlet Requirement: 3-Prong, GFI
Circuit Protector: 15 Amp
WARNING:
120 Volts AC may cause serious injury from electric shock.
To ensure safety:
1.
1. Disconnect electrical power before servicing
2.
2. Only plug unit into grounded electrical circuit
3.
3. Do not use extension cord
4.
4. Do not use a plug adapter.
The Horizon Series Dehumidifiers utilizes its integral humidistat to monitor the conditioned space.
When the relative humidity goes above the selected set point, the dehumidifier will energize. Air is
drawn across an evaporator coil, which is cooler than the dew point of air. This means moisture will con-
dense out of the air. The air is then reheated through the condenser coil and distributed back into the
room.
The area to be controlled should be sealed with a vapor barrier. If unit is installed in a crawlspace,
all vents should be sealed.
WARNING:
Do not install your dehumidifier in a corrosive environment. Some liquid vapor
barriers dry via "solvent evaporation". Always make sure that barrier is completely dry and
area is throughly ventilated before installing dehumidifier.
Step #1: Place dehumidifier on a level surface.
Identification
Date of Purchase:
Electrical Supply
Principle of Operation
Installation
3
Hide quick links:
Advertisement
Table of Contents
