Optional Parts, Accessories And Tools - Toshiba RAS-B10SKVP-E Installation Manual

3 OPTIONAL PARTS, ACCESSORIES AND TOOLS

Optional Installation Parts
Part Code
Y
Z
Attachment bolt arrangement of outdoor unit
• Secure the outdoor unit with the attachment bolts and nuts if the unit is
likely to be exposed to a strong wind.
• Use φ8 mm or φ10 mm anchor bolts and nuts.
• If it is necessary to drain the defrost water, attach drain nipple to the
base plate of the outdoor unit before installing it.
Accessory and Installation Parts
Part No. Part name (Q'ty)
a
Installation plate x 1
b
Wireless remote controller x 1
c
Battery x 2
Others Name
Owner's manual
Installation manual
Important information
and warning*
B/W strips
(Energy efficiency labels)
When using a multi-system outdoor unit, refer to the installation manual provided with the model
concerned.
EN
Parts name
Refrigerant piping
Indoor unit name
RAS-B10SKVP-E, B13SKVP-E
RAS-M10SKCVP-E, M13SKCVP-E
RAS-B16SKVP-E, M16SKCVP-E
Shield pipe (for extension drain hose) (polyethylene foam, 6 mm thick)
Part No.
d
e
f
This model is not equipped with an
extension drain hose.
• For the extension drain hose, use a
commercially available one.
Liquid side
(Outer diameter)
6.35 mm
6.35 mm
Elongated drain
hole
(i)
Part name (Q'ty)
Remote controller holder x 1
Plasma pure filter x 1
Mounting screw
φ4 x 25L x 6
4
Gas side
(Outer diameter)
9.52 mm
12.7 mm
Suction side
Drain hole
Diffuser
Part No. Part name (Q'ty)
g
Remote controller holder
mounting screw
φ3.1 x 16L x 2
h
Drain nipple* x 1
(RAS-10SAVP-E, 13SAVP-E,
16SAVP-E)
i
Water-proof rubber cap* x 2
(RAS-10SAVP-E, 13SAVP-E,
16SAVP-E)
Parts marked with asterisk (*) are packaged with the
outdoor unit.
Q'ty
1 ea.
1
(h)