Advertisement
Open the small CD and copy the "Calibration Software" and "Application Software" file folders into your
computer.
Open the file of Calibration Software, run "IWB_Setup.exe";
icon on desk :
Education software installation
1.
dotNetFX35 installation
(1).When the operation system is Windows XP, Win8 or Vista, please place the big software CD-ROM
into the CD drive and copy the "dotNetFX35'' folder in the CD-ROM onto your PC's hard disk
drive.
You can download this file from http://www.microsoft.com/en-us/download/details.aspx?id=21.
(Please skip this step with Windows 7)
Don't run the software in CD
(2). Open the "dotNetFX35'' and then run
2. GL Board installation
(3).Open
the
folder
Click "next step" until it fished. There will be a icon of GLboard
Step
2.
Adjust the camera
Chose "Installation and debugging"-"Mode
(As Pic3).
***Adjust the camera's position to make Projection screen image take up 60-80% of the software
interface.
"Application
Software'',
1", then you can see the whole projection screen clearly
5
Manual for FP3 Board
, Then there will be
.
double
click
"GLboard_Setup.exe"
on the desktop.
Hide quick links:
Advertisement
