How To Turn On And Off Handheld Transmitter; Receiver Functions - Nissindo LX-4040U Installation And Operation Manual

HOW TO TURN ON AND OFF HANDHELD
TRANSMITTER
Click the power switch to turn on/off your transmitter. When on
transmitter's light will be on, when off transmitter's light will be off.
When the power light is flashing, that
NOTE
indicates that the transmitter's battery is low.
If there is no light at all, battery is out of power.

RECEIVER FUNCTIONS

Power Light (Red): When power is on the light should be on.
RF Light (Orange): When there is an uninterrupted all good radio signal
between both Receiver and Microphone RF light should be on.
AF Light (Green): When audio is being transmitted from the transmitter to the
receiver AF light will be on.
SQ: Please use a screwdriver to adjust the SQ or Squelch settings for more
clearer audio for each Channels
Volume: Please use a screwdriver to adjust the Min/Max for volume for each
Channels.
GET TO THE POINT
LX-4040U
MULTI-CHANNEL
ANTENNA-A
PROFESSIONAL
WIRELESS MICROPHONE
UHF
SQ
POWER RF
UHF WIRELESS RECEIVER MODULE
Portable Channel Receiver
UHF UHF
SQ MIN MAX SQ
POWER RF AF POWER RF AF
UHF WIRELESS RECEIVER MODULE UHF WIRELESS RECEIVER MODULE
Channel-1 Channel-2
MIN MAX
AF
UHF
MIN MAX SQ MIN MAX
POWER RF AF
UHF WIRELESS RECEIVER MODULE
Channel-3
NOTE
Portable Channel Receiver: When you
are using 4 microphones at the same time
and if one channel may not work. This
might be interfered by other electronic
device's frequency surround you up to 100
feet. To solve this problem, you may
remove the nonworking Channel from the
receiver and replace with a functioning
Channel with a different frequency and a
matching microphone.
9
ANTENNA-B
POWER
Replacing
UHF portable
SQ MIN MAX receiver
POWER RF AF
UHF WIRELESS RECEIVER MODULE