Receiver Description - Nissindo LX-4040U Installation And Operation Manual

RECEIVER DESCRIPTION

SETTING UP YOUR RECEIVER:
1. The package comes with two antennas, a receiver, one AC power
adaptor, one audio cable, four 9V battery, and four microphones.
GET TO THE POINT
LX-4040U
MULTI-CHANNEL
ANTENNA-A
PROFESSIONAL
WIRELESS MICROPHONE
BAT LOW BAT LOW
ON ON
OFF OFF
Handheld Transmitter: 4 Set
Audio Cable (For mixed out): 1 Unit
2. Screw the antennas (BNC socket) into the back panel of the
receiver and turn it in clockwise to lock it as shown in the following
diagram. You can adjust the antennas to angle differently for
adjusting signal strenghts.
UHF UHF
SQ MIN MAX SQ
POWER RF AF POWER RF
UHF WIRELESS RECEIVER MODULE UHF WIRELESS RECEIVER MODULE
Channel-1 Channel-2
Receiver: 1 Set
BAT LOW BAT LOW
ON ON
OFF OFF
UHF
MIN MAX SQ MIN MAX
AF POWER RF AF
UHF WIRELESS RECEIVER MODULE
Channel-3
AC Power
Adapter: 1 Unit
ALKALINE
BATTERY
9V Battery: 4 pieces
GET TO THE POINT
4
UHF
SQ MIN MAX
POWER RF AF
ANTENNA-B
UHF WIRELESS RECEIVER MODULE
Channel-4
8.43 inches
21.4 cm
9 V
LX-4040U
MULTI-CHANNEL
PROFESSIONAL
WIRELESS MICROPHONE
POWER
Receiving
Antenna:
2 Units
ANTENNA-A