HOW TO CONNECT RECEIVER OUTPUTS
There are 5 different connectors as shown in the following diagram:
A. Mixed channel audio output (for all microphone channels)
B. Channel-4 3-Pin XLR balanced audio output.
C. Channel-3 3-Pin XLR balanced audio output.
D. Channel-2 3-Pin XLR balanced audio output.
E. Channel-1 3-Pin XLR balanced audio output.
NOTE
A. Is an unbalanced audio out. If you connect the mixed out to the mixer or
amplifier, and change effects all microphones will have the same effects. Enables
the use for all 4 microphones.
B. Balanced XLR for Channel 4. Enables usage of Microphone 4.
C. Balanced XLR for Channel 3. Enables usage of Microphone 3.
D. Balanced XLR for Channel 2. Enables usage of Microphone 2.
E. Balanced XLR for Channel 1. Enables usage of Microphone 1.
Comments? sales@nissindousa.com
www.nissindousa.com
Nissindo Trademark All Right Reserved.
Engineered And Design In U.S.A.
GET TO THE POINT
Model: LX-4040U
Serial:
UHF WIRELESS SYSTEM CHART
Comments? sales@nissindousa.com
www.nissindousa.com
Nissindo Trademark All Right Reserved.
Engineered And Design In U.S.A.
GET TO THE POINT
Model: LX-4040U
Serial:
Rear View
XLR
XLR
Balance Input
Balance Input
Audio Mixer Amplifier or a Karaoke Unit Input terminal
AUDIO-OUT
XLR
POWER-IN
CH.1, 2, 3, 4
Mixed 1/4
DC: 13V-18V
Channel-4
500mA
A
B
AUDIO-OUT
XLR
POWER-IN
CH.1, 2, 3, 4
Mixed 1/4
DC: 13V-18V
Channel-4
500mA
XLR
XLR
Balance Input
Balance Input
XLR
XLR
Channel-3
Channel-2
Channel-1
C
D
XLR
XLR
Channel-3
Channel-2
Channel-1
XLR Balanced Connection
1/4"
1/4"
Unbalance Input
Unbalance Input
5
XLR
E
XLR
1/4"
Unbalance Input
Unbalance Input
1/4"