Tv Soundconnect - Samsung HW-J550 User Manual

TV SOUNDCONNECT

You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV
SoundConnect function.
▶ Connecting a TV to the Soundbar
1. Turn on the TV and Soundbar.
Open the menu of the TV.
●
Move to Speaker Settings on the "Sound" tab.
●
Set the "Add New Device" menu to "On".
●
2. Press the ( ) button on the main unit's top panel
or the (SOURCE) button on the remote control
to select the TV mode.
3. On the TV, a message asking whether to enable the
TV SoundConnect function appears. "[Samsung]
Soundbar" is displayed on the TV screen.
4. Select <Yes> using the TV remote to finish
connecting the TV and Soundbar.
Switching the Soundbar's mode from TV to
●
another mode automatically terminates TV
SoundConnect.
To connect the Soundbar to another TV, the
●
existing connection must be terminated.
To terminate the existing connection, press
●
and hold the p button on the remote for 5
seconds or switch to another mode. To
connect to the other TV, follow Steps 1
through 4 above.
The TV SoundConnect (SoundShare) function
●
is supported by some Samsung TVs released
from 2012 on. Check whether your TV
supports the TV SoundConnect (SoundShare)
function before you begin. (For further
information, refer to the TV's user manual.)
If your Samsung TV was released before 2014,
●
check the SoundShare setting menu.
Connect
●
●
●
▶ Using the Bluetooth POWER On
function
The Bluetooth POWER On function is available after you
have successfully connected the Soundbar to a
Bluetooth compatible TV using TV SoundConnect.
When the Bluetooth POWER On function is ON, turning
the connected TV on or off will turn the Soundbar's
power on and off as well.
1. Connect the TV to your Soundbar using the TV
SoundConnect function.
2. Press the Bluetooth POWER button on the
Soundbar remote. "ON/OFF-BLUETOOTH POWER"
appears on the Soundbar's display.
ON-BLUETOOTH POWER : The Soundbar turns
●
on and off when you turn the TV on or off.
OFF-BLUETOOTH POWER : The Soundbar only
●
turns off when you turn the TV off.
●
21
If the distance between the TV and Soundbar
exceeds 16.25 ft. (5m), the connection may
not be stable or the audio may stutter. If this
occurs, relocate the TV or Soundbar so that
they are within operational range, and then
re-establish the TV SoundConnect
connection.
TV SoundConnect Operational Ranges:
- Recommended pairing range: within 20
inches (within 50cm)
- Recommended operational range: within
16.25 ft. (5m)
The Play/Pause, Next, Prev buttons are not
operable in TV SoundConnect mode.
This function is supported by some Samsung
TVs released from 2013 on.
FUNCTIONS