BELGACOM MAESTRO 2035 User Manual page 41

English
Warranty
Selected with care by Belgacom, the terminal equipment you have bought is covered
by a parts and labour warranty against all equipment flaws or manufacturing defects
for a period of two years, unless any contractual provisions are made to the contrary.
The warranty takes effect from the redemption or delivery date of the equipment. Any
call-out by Belgacom staff is not covered by the warranty.
If you experience any difficulties with your equipment, you may give the telephone book
one of our phone shops and authorized sellersmaking sure that you are in possession
of this certificate together with the complete item of equipment in its original packaging
or in some other that affords similar security. The addresses of our phone shops appear
in the information pages of Telephone directories.
In the event of any flaw in the equipment or manufacturing defect, your equipment will
be repaired or replaced free of charge upon presentation of the ticket of purchasing.
Belgacom alone shall determine what repairs and/or replacements are needed. The war-
ranty period that applies to any equipment that is repaired or replaced shall expire on
the expiry date of the equipment purchased, but shall not be less than 3 months.
The warranty does not cover:
- damage of any kind the origin of which was not occur prior to the sale;
- damage, disturbances or defects that are attributed to any fault of the customer and
whose cause is external to the equipment: lightening, surges in voltage, humidity,
accidental damage, improper use or poor maintenance, the failure to comply with
the instructions on use as well as any kind of accident;
- the repair or replacement of detachable parts (flexes, plugs, aerials, etc...), the re-
placement of accessories whose regular renewal is necessary (batteries, paper, ink,
etc...) or the supply or cleaning products.
The warranty shall not apply:
- if the customer modifies or repairs the terminal equipment him/herself or via services
supplied by persons who are not accredited by Belgacom;
- if he/she removes or falsifies the manufacturer's numbers and/or the marking on the
terminal equipment.
Belgacom may not be held responsible for any indirect or unsubstantial damage sus-
tained by the customer as a result of the incorrect functioning of the machine such as
any loss in production, loss of income or loss of contracts.
The general sale terms of our terminal equipment may be obtained by simply
making a request to any Belgacom department open to the public and on in-
ternet site www.belgacom.be.
Belgacom Public Law Limited Company
Bd. Roi Albert II 27 – B 1030 Brussels VAT BE 202 239 951
RC Brussels 687 163
40
W
ARRANTY
Maestro 2035 User Manual