Installation - DAVI & CIA Dp smart User Manual

2. INSTALLATION

Before putting the device into use, please read with care the information given in the Operating Instructions.
They contain important instructions for installation, proper use and maintenance of the device.
The manufacturer shall not be liable for damages arising out of failure to heed the following instructions:
When using electrical components under increased safety requirements, always comply with the appropriate
o
regulations.
Improper installation will render the warranty null and void.
o
Ensure the voltage marked on the power supply unit, matches your main power supply.
o
This device is designed for use indoors.
o
Observe the permissible ambient temperatures for use.
o
Caution upon installation and usage
Humidity: Do not install the product in the place with rain leakage or of high humidity. If the product is leaking, Humidity Humidity Humidity
o
it may cause damage or fire.
Repair: Do not disassemble or remodel the product because it may cause danger such as an electric shock. Repair:
Repair: Repair:
o
When a problem occurs, do not attempt to repair it. Instead, contact the seller.
Electricity: Do not use electricity except for what is prescribed here. Using improper electricity may cause an Electricity: Electricity: Electricity:
o
electric shock or danger.
Installation Environment: Do not install the product in a too hot or cold place. (Recommended Temperature : Installation Environment: Installation Environment: Installation Environment:
o
15ºC ~ 35ºC)
Sunlight: Do not expose the camera of the product to the sun or a direct ray of light. It may cause product Sunlight:
Sunlight: Sunlight:
o
damage.
Shock or Vibration: Do not drop the product or give it a strong shock or vibration. Shock or Vibration:
Shock or Vibration: Shock or Vibration:
o
If the product does not work properly: : : : If a problem occurs while using the product (unidentified noise, smell or If the product does not work properly If the product does not work properly If the product does not work properly
o
smoke), stop using it and turn the power off and contact the seller.
Dirt on Lens: Dirt on Lens: Make sure to keep camera lenses clean and away from pollution. If polluted by finger print or Dirt on Lens: Dirt on Lens:
o
external dirt, cleanse it with cotton stick soacked with 70% Ethyl Alcohol solution or use air blower to remove
the dust.
After- - - - Sales Service: After Sales Service: When any of the following occurs, turn the power off and have the product repaired at
After After Sales Service: Sales Service:
o
the place of purchase.
- Power Connector is damaged
- The product is leaking
- Liquid is spilt over the product or it has alien substance.
- Product does not work as indicated in this manual. (Attempting to operate the product against
manual may cause more serious damage.)
- Product is dropped to the floor and seriously damaged.
4
USER'S MANUAL
MA30-02/A