USER'S MANUAL
MA30-02/A
3. 3. 3. 3.6 6 6 6 . . . . MOISTURE
MOISTURE
MOISTURE
MOISTURE
To take the moisture measurement correctly it is important that the sensor is not
in contact with the skin at the beginning of the measurement.
When the device makes a "beep-beep" sound, place the moisture sensor in
o
contact with the skin
The green bar on the display will start moving
o
With the "diriring" sound the result of the measurement will appear on display
o
Press Next button to move to the next measurement
o
3. 3. 3. 3.7 7 7 7 . . . . SEBUM
SEBUM
SEBUM
SEBUM
The sebum measurement of two differentiated areas of the face,
is meant to determine the skin type (dry, normal, mixed or oily).
This process must be repeated for both designated face areas (U-
zone and T-zone).
Take one sample of sebum indicator
o
Press the pink area of the sebum indicator on the skin for 3
o
seconds, in the T-zone
Frame the pink area, impregnated with skin's sebum, using
o
the camera
Press Capture button
o
Press Next button
o
Repeat the previous steps for the U-zone, using a new sebum
o
indicator sample
Press Next button when finished
o
3. 3. 3. 3.8 8 8 8 . . . . EVENNESS, PORES, SPOTS AND WRINKLES
EVENNESS, PORES, SPOTS AND WRINKLES
EVENNESS, PORES, SPOTS AND WRINKLES
EVENNESS, PORES, SPOTS AND WRINKLES
In order to diagnose further measurements, capture images of the recommended
areas
Place the analyzer head in the recommended location according to the
o
measurement
Press and hold the Capture button until the analyzer finishes the auto focus
o
and takes the picture
Press Next button to go to the next measurement
o
9