Table of Contents
Advertisement
Lighting the grill burner
Do not grill with oven door closed.
Always fit the heat shield supplied with the cooker under the front panel before
commencing operations (Fig. 8).
WARNING. The heat shield and the oven door reaches a very high temperature
whilst in use. Keep children away and allow to cool before removing.
The grill burner generates the infra-red rays for grilling.
To light the grill burner operate as follow:
- Open the oven door and apply a lighted match or taper to the grill burner (fig. 7)
- Push and turn the grill/oven knob clockwise until you match the symbol
control panel reference line.
- Once the grill burner is lit, wait for about 15 seconds before releasing the knob (time
of priming of the valve) and than set the oven door in half-closed position.
Should the flame of the burner estinguish for any reason, the safety valve will cut
off automatically the gas flow to the tap. To re-start operation, take the knob to
"off" position and repeat operations as above explained.
Notes:
– The grill burner has only one setting, that is full-on
– It is important that the heat shield is fitted the correct way up, as shown in the figure 8.
For best results when using the grill, place the shelf on the second level and when using the
grill pan handle avoid contact with the heat shield which will be
Fig. 7
How to use the grill
IMPORTANT WARNING
HOT during use
with the
Fig. 8
9
Advertisement
Table of Contents
