Pedal Assembly, Pedal Circuit Board - Yamaha P-85 Service Manual

P-85/P-85S
11.

Pedal Assembly, PEDAL Circuit Board

(Time required: About 4 minutes)
11-1 Disconnect the PK cable from the [PEDAL UNIT]
jack. (Fig. 6)
11-2 Tilt the keyboard stand backward to lift the forward
bottom portions and remove the pedal assembly.
(Fig. 7)
* The pedal assembly is just fi t into the concave
portion in the middle of the pedal board assembly.
<Back view>
PK cable
11-3 Place the pedal assembly upside down, remove
the three (3) screws marked [150] to remove the
pedal plate. (Fig. 8)
11-4 Remove the eight (8) screws marked [160A]. The
upper pedal case can then be removed. (Fig. 8)
11-5 Remove the six (6) screws marked [160B]. The
stopper stay assembly can then be removed.
(Fig. 9)
[150]
Plate
10
Cord clamper
Fig. 6
<Bottom view>
Keyboard stand
Pedal board assembly
Pedal assembly
[160A]
Fig. 8
Pedal assembly
Fig. 7
<Side view>
Upper pedal case