Initializing The Vb150 - Canon VB150 User Manual

2. Initializing the VB150

When you have completed connecting the cameras, the next step is to initialize the VB150.
1
LAN cable
HUB
a Precautions for Turning the VB150 On and Off
The VB150 has no power switch. To turn the VB150 off and on, unplug the AC adapter. When you
unplug the AC adapter from the wall outlet, wait at least 5 seconds and then plug the AC adapter
into the wall outlet. Be sure to observe the precautions given in "aImportant Safety Instructions"
(→ P.9).
VB150
● If the VB150 will not be used for some time, unplug the AC adapter from the wall
outlet.
2
AC adapter
Supplied CD-ROM
Connect the VB150 to the network using a
LAN cable. Turn on the power to your
equipment in the following order: Network
device (hub in this case), PC, camera, and
then VB150.
Wall Outlet
AC cable
Insert the supplied CD-ROM into the PC
and double click the VB Initial Setup Tool,
"VBSetup.exe" to launch the program.
2
28