The Added Instruction For R/C Buttons; A (Flashback); E (Mute); Mpx - Sharp LC-40S3H Operation Manual

Watching TV
w Reminder setting
Press EPG.
1
Press a /b to select the programme you want
2
to watch.
Press B to set reminder time and mode.
3
Press ENTER to save reminder timer, and
4
display the reminder schedule list.
NOTE
• The time displayed on the EPG is information sent by the
TV station.

The added instruction for R/C buttons

A (Flashback)

Press A to switch the currently tuned channel or
external input source to the previously tuned channel
or external input source.
Press A to switch the currently tuned channel
1
or external input source to the previously tuned
channel or external input source.
Press A again to switch back to the currently
2
tuned channel or external input source.

e (Mute)

Using e (Mute) on the remote control unit
current sound output.
Press e (Mute).
1
• The sound is silenced.
• " " is displayed while the mute function is on.
Press e (Mute) again within 30 minutes to
2
cancel the mute.
NOTE
• Mute will be cancelled after 30 minutes. However,
the TV will not suddenly output loud sound as the
volume level will be set to 0 automatically. Increase
the volume level by pressing VOLk.
24

MPX

You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
Each time you press MPX the mode switches as
follows.
In the NICAM TV broadcasts
Signal
When receiving a
stereo signal
When receiving a
bilingual signal
When receiving a
monaural signal
In the TV mode of A2 TV broadcasts
Signal
When receiving a
stereo signal
When receiving a
bilingual signal
When receiving a
monaural signal

GUIDE

Display the channel list of DTV and ATV.
Press GUIDE ,and then display the "Channel
1
List" of DTV and ATV on the screen.
Press a/b to select the desired channel , and
2
then press ENTER to switch to the selected
channel.
• When received a encryption program that cannot
be played, it will display the
to mute the
Mode switch
NICAM STEREO , MONO
NICAM DUAL Ⅰ , NICAM DUAL Ⅱ ,
NICAM DUAL Ⅰ + Ⅱ , MONO.
NICAM MONO, MONO
Mode switch
STEREO, MONO
CH A, CH B, CH AB
MONO
key icon.
" "