Advertisement
3.3- . Test
Models with push-in dial
There is also a secret hidden dial, for use by . technicians only. It has a special chec-
king program.
In order to check the functioning of the electrical components of the dishwasher, the
. program can be selected as follows:
1- Switch off the dishwasher at the master switch.
2- Press and hold down the up/down button and the start/pause button.
3- While holding down the up/down button and the start/pause button, switch on the
dishwasher at the master switch, until the . test start confi rmation beep sounds.
4- "SE" (secret mode) will appear on the display.
5- Press the program selector dial until the letters "SA" (Technical Assistance Service)
appear on the display. The dishwasher is now in . test mode.
6- Press the Start/pause button to validate the . Test option.
I
Description of all Functions
Important:
If you hold down the button for too long, you
will not be able to go back. You will need to restart the dis-
hwasher and the whole process again.
35
Up/down button
Advertisement
