Appendix; Replacing The Battery; Enabling The Internal Heater - Panasonic FZ-X1 Operating Instructions Manual

Appendix

Replacing the battery

Replacing the battery
Place the unit on a flat, stable surface such as a table when replacing
the battery.
1. Turn off the unit (page 42).
2. Remove the battery cover (page 35).
3. Lift the battery by pulling on the yellow tab, and then remove the
battery.
4. Install the replacement battery (page 40).
5. Attach the battery cover (page 36).
Hot swapping the battery
The unit supports "hot swap" battery replacement, which allows you
to replace the unit's battery without turning the unit off.
1. Press and hold
is displayed.
2. Tap [Battery hot swap].
3. Follow the on-screen instructions.
4. Replace the battery.

Enabling the internal heater

Enabling the internal heater
If enabled, the unit's internal heater will activate in order to warm the
product when its temperature is -12 °C (10.4 °F) or colder.
1. From the home screen, tap
[Heater operation].
2. Select [Auto] or [Off].
50
(power button) until the power options dialog
→ [Settings] → [Heater] →