Panasonic FZ-X1 Operating Instructions Manual page 48

The indicator lights in red.
• The remaining battery level is approximately less than 15 % of a
full charge. Charge the battery.
The indicator flashes in red.
• Battery authentication failed. Use a battery specified on page 57.
• There may be debris lodged in the battery charge terminals.
Remove the battery and remove any debris found.
• Charging may have stopped automatically after a preset amount
of time passed. Disconnect the AC adaptor, reconnect it, and
then turn on the unit. If the problem persists when charging,
contact your technical support representative.
The indicator does not light during charging.
Battery charging ends quickly, or the battery cannot be
charged at all.
• The AC adaptor cable or USB cable is not connected properly.
Confirm all connections, remove the AC adaptor cable or USB
cable, and then insert it again. Make sure the AC adaptor plug or
micro USB plug is inserted fully into the unit.
• There may be debris lodged in the battery charge terminals.
Remove the battery and remove any debris found.
• Replace the battery with a new one.
Other
The date and time are incorrect.
• Confirm the date and time settings. From the home screen, tap
→ [Settings] → [Date & time].
• Set the date and time automatically.
1. From the home screen, tap
time].
2. Turn on the [Automatic date & time] and [Automatic time
zone] checkboxes.
3. Make sure the unit is in an area with good wireless reception,
turn the unit off, and then turn it on again.
• The unit will not recognize dates after January 18, 2038.
48
→ [Settings] → [Date &