Brake Light; Turn Signal Lights; Spark Plug - ADLY MOTO GTA 50 Owner's Manual

MAINTENANCE

BRAKE LIGHT

Turn ignition switch to "ON" position. Apply both brake levers separately for front and
rear wheels to ensure the brake light is functioning normally.

TURN SIGNAL LIGHTS

Turn ignition switch to "ON", use the turn signal switch to activate both left and right side
lights. Verify front and rear turn signals functioning normally.

SPARK PLUG

Spark plug fouling and excessive gap can lead to performance issues. Inspect regularly.
Standard electrode gap is .023-.027 inches.
The standard spark plug type is NGK C7HSA
Do not remove spark plug immediately after riding scooter as it will be extremely
hot. Allow engine to cool completely before removing spark plug from engine.
or NGK CR7HSA
CAUTION
3 3