Lcd Display Modes Introduction - Solmeta Geotagger Pro User Manual

Solmeta geotagger Pro

LCD display modes introduction

LON: Longitude, "W"= -west, "E"= -east
LAT: Latitude, "S"= -south, " N"= -north
ALT: Altitude (meters)
SPE: Moving speed (km/h)
DAT: Current date (time zone=UTC)
TIM: Current Time. Can be displayed as UTC or
Local time. "U" or "L" indicates UTC or Local.
SUN: Number of GPS satellites received.
More satellites provide increased accuracy.
DIR: Heading (direction) information
GRA: Electronic level. The number at left is the unit's
current pitch (elevation) data. The number at right is
the roll (tilt) data.
MEM: Memory Used (percentage). Amount of internal
memory used by track logging data.
CON: Track logger mode. When lit, track logging is
active. When no other mode icon is lit, the display
shows log interval from 1-second to 30-minute.
GPS signal indicator:
that the Pro is searching for a GPS signal. A solid GPS
icon indicates that a signal has been acquired and GPS
data is available for internal logging or to the camera.
Compass calibration mode
Track logger mode
5
A blinking GPS icon indicates
R