Chapter 3 - Operation; Figure 8 - Front Panel Controls - ADEMCO AMC14X Installation And Operating Instructions Manual

14-Inch Color Monitor
Chapter 3 – Operation
Figure 8 – Front panel controls
To turn on the monitor, press the power button on the front panel. After a
few seconds, video should appear on the monitor. If video does not appear,
refer to the Troubleshooting section of this manual.
When both CVBS (A or B) and Y/C input signals are simultaneously
present, the monitor gives preference to the Y/C input source.
When the Y/C selector switch is off, the composite video source can be
switched between two video input sources by pressing the A/B selector
switch.
The VOLUME knob is used to control the audio volume.
The SHARPNESS knob is used to adjust the picture sharpness.
The CONTRAST knob is used to increase or decrease the overall contrast of
the picture displayed on the monitor.
The BRIGHT knob controls the overall brightness of the picture displayed
on the monitor.
AMC14 7