12-Inch B&W Monitor
Chapter 3 – Operation
To turn on the monitor, press the power button on the front panel. After a
few seconds, video should appear on the monitor. If video does not appear,
refer to the Troubleshooting section of this manual.
If the picture is skewed, adjust the H-HOLD (horizontal hold) by rotating
the knob clockwise or counterclockwise until the picture is stationary.
If the picture rolls, adjust the V-HOLD (vertical hold) by rotating the knob
clockwise or counterclockwise until the picture is steady.
If the picture is too dark, rotate the BRIGHT knob clockwise to brighten it.
If the picture is too bright, rotate the BRIGHT knob counterclockwise to
darken it.
Rotate the CONTRAST knob clockwise to increase picture contrast and
counterclockwise to decrease contrast.
AMM12
7