Table of Contents
Advertisement
14-Inch Color Monitor
Required Installation Tools
Installing the AMC14 monitor does not require any special tools.
Installation Instructions
WARNING: The monitor should be installed in an area that is
clean, dry and well ventilated. Do NOT install the monitor where it
can get wet; such as near pools, sinks, open windows, etc. Do NOT
install the monitor in excessively dusty areas; dust can block
ventilation holes causing the monitor to overheat. Operate the
monitor on flat firm surfaces; NOT on surfaces such as rugs,
carpet, beds or sofas because these can block ventilation holes on
the bottom of the monitor. Do NOT install the monitor where items
such as drapes or curtains can block ventilation holes. If the
monitor is installed in a rack, make certain it has sufficient
ventilation.
WARNING: If the monitor's plug does not fit your power outlet, do
NOT modify the plug. Have a certified electrician update your
power outlet. Do NOT route the power cord where individuals can
trip on it. Do NOT route the power cord where it can be damaged
such as under a rug.
Place the monitor on a flat sturdy surface near a power outlet. Connect the
video input cable to the Video A In connector. The video input can be from
a camera, VCR, multiplexer or the loop output of another monitor. A
second video source can be connected the Video B In.
If your video source has an audio output, connect the audio to Audio In.
4
AMC14
Advertisement
Table of Contents
