Chapter 2 - Installation - ADEMCO AMC15LCD Installation And Operating Instructions Manual

15" color tft-lcd monitor
Table of Contents

Advertisement

15-Inch Color Monitor
Chapter 2
- nstallation
I
LCD monitors may be mounted in any position or orientation. Considerations for
mounting include regard for how the monitor is going to be used, routing of
connecting cords, and locations away from heat sources (including direct sunshine
on the black case).
Mounting attatchment points include 10-32 inserts.
Cooling is not required, but some airflow around the case will
allow the small amount of heat to be dissipated.
Power is required from a regulated supply (provided) or other 12 volts DC source.
The noise on the supply must be below 100 mVpp.
CAUTION: Many portable battery systems, including automobiles,
with a nominal 12 VDC supply often have power spikes and can
operate as high as 18 VDC while charging. Make certain your power
supply meets the 12 VDC
10% requirements.
Plug and Play
The VESA plug and play standard eliminates a complicated, time consuming setup.
It allows you to connect your monitor to a Plug and Play compatible system without
the usual hassles and confusion. Your PC system can easily identify and configure
itself for use with your display.
Installing the Video Driver (Windows 95/98)
To install the Video driver, refer to the following sequence.
Select Start/Setting/Control Panel.
2
AMC15LCD

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amc15lcdx

Table of Contents