Canon imageClass MF5770 Setup Sheet page 2

7 Install software
To Use the Machine as a Network Printer (Network Connection)
IMPORTANT
• The machine needs to be restarted for the specified settings to become effective. To restart the
machine, disconnect the power cord, wait for at least 10 seconds, and connect the power cord again.
NOTE
• For details on specifying network settings, see Chapter 2, "Specifying the Network Settings," in the
Network Guide.
• For additional network protocol settings, see the Network Guide.
• For the values of the network settings, consult your network administrator or internet service provider
(ISP).
• The machine does not support Network Scanning or PC Faxing. The printer must be connected via
USB for scanning and PC faxing.
Specifying Network Settings
1. Press [Menu] ➞ or to select
<6.NETWORK SETTINGS> on the LCD ➞ press [OK].
2. Press or to select <1.LAN SETTINGS> ➞
press [OK].
3. Press or to select <1.IP ADDRESS AUTO.> ➞
press [OK].
Installing Driver Software
NOTE
• For Windows 2000/XP/Server 2003, log on as Administrator to install the software.
• The screenshots below are from Windows XP. However, the installation procedure is essentially the
same for other versions of Windows.
1. Turn on your computer.
2. Quit any open applications, including virus
checking software.
3. Insert the User Software CD into the CD-
ROM drive.
4. When the MF Setup screen appears, click
[Install Drivers].
NOTE
• If the MF Setup screen is not displayed, on the
Windows desktop, click [start] ➞ [My Computer].
Open the CD-ROM icon, then double-click
[Setup (Setup.exe)].
• You can click [Read Manuals] to read PDF
manuals.
5. When the MF Network Drivers - Setup
Wizard screen appears, click [Next] and
follow the instructions on the screen.
• To obtain an IP address automatically (dynamic allocation):
4. Press or to select <ON> ➞ press [OK].
5. Press or to select <1.DHCP>, <2.BOOTP>, or
<3.RARP> ➞ press [OK].
6. Press or to select <ON> ➞ press [OK].
7. Press [Stop/Reset] to return to the standby display.
8. Restart the machine by disconnecting the power cord,
and then reconnecting it.
6. Select the target machine in the Device List ➞
click [Next].
NOTE
• f the target machine is not listed in the Device
List, click [Search by IP Address] and enter the
IP address ➞ click [OK]. If you do not know the
machine's IP address, see "Checking Network
Settings" on the previous page.
7. Select the driver(s) to install ➞ click [Next].
Follow the instructions on the screen to start
installation.
• To specify an IP address manually (static allocation):
➞
4. Press or to select <OFF> press [OK].
5. Press or to select <2.IP ADDRESS> ➞ press [OK].
6. Enter an IP address of the machine using the numeric keys ➞
press [OK].
Write down the IP address you entered: _______ . _______ . _______ . _______
7. Press or to select <3.SUBNET MASK> ➞
press [OK].
8. Enter the subnet mask using the numeric keys ➞
press [OK].
Write down the subnet mask you entered: _______ . _______ . _______ . _______
9. Press or to select <4.DEFAULT GATEWAY> ➞
press [OK].
10. Enter the default gateway address using the numeric keys ➞
press [OK].
Write down the gateway address you entered: _______ . _______ . _______. _______
11. Press [Stop/Reset] to return to the standby display.
12. Restart the machine by disconnecting the power cord, and then reconnecting it.
8. After the drivers are installed, select the
default printer ➞ click [Next].
9. Select the driver type (Printer and/or Fax) ➞
click [Next] to print/fax a test page (optional).
10. When the installation is complete, click [Exit]
to close the MF Network Drivers - Setup
Wizard screen.
Connecting the Machine to a Network
1. Connect a Category 5 rated (Cat 5)
twisted-pair LAN cable to the 10Base-T/
100Base-TX port on the back of the machine.
Connect the other end of the cable to a net-
work router or a hub.
Checking Network Settings
1. Press [Menu] ➞ or to select
<6.NETWORK SETTINGS> on the LCD ➞ press [OK].
2. Press or to select <2.VIEW IP ADDRESS> ➞
press [OK].
3. Press or to select the desired setting ➞
press [OK].
4. Press [Stop/Reset] to return to the standby display.
11. Click [Exit] to close the MF Setup screen.
Remove the User Software CD from the CD-
ROM drive and store it in a safe place.
You have now completed machine setup.
Part no. FA7-7769 (010)
Canon is a trademark of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN JAPAN OR CHINA
©2005 Canon Inc.