Remote Control; Resetting The Microcomputer; Operation Manual - Sharp CD-BK1600V Service Manual

CD-BK1600V/1800V/190V
CD-BK1600V/1800V/190V

Remote control

2
3
4
5
6
7
10 11 12 13
14
15
16
17
18
19
Notes concerning use:
Replace the batteries if the operating distance is reduced
or if the operation becomes erratic.
Periodically clean the transmitter LED on the remote con-
trol and the sensor on the main unit with a soft cloth.
Exposing the sensor on the main unit to strong light may
interfere with operation. Change the lighting or the direc-
tion of the unit.
Keep the remote control away from moisture, excessive
heat, shock, and vibrations.
1
8
9
20
21
22
23
24
25
26
27

OPERATION MANUAL

0.2 m - 6 m
(8" - 20')
1. Remote Control Transmitter LED
2. Echo Level Up/Down Buttons
3. Karaoke Mode Button
4. Vocal Replacer Button
5. (VCD) VCD Auto/On Button
6. (VCD) Playback Control Auto/Off Button
7. (VCD) On Screen Display On/Off Button
8. On/Stand-by Button
9. (VCD) Direct Search Button
10. (VCD) Digest/Time Search Button
11. (VCD/CD) Clear Button
12. (VCD/CD) Memory Button
13. (VCD/CD) Disc Skip Button
14. (VCD) Skip/Previous Button
(CD) Track Down/Review Button
(TUNER) Preset Down Button
(TAPE 2) Fast Wind Button
15. (VCD) Bookmark Button
16. (TAPE 2) Reverse Play Button
17. (VCD) PAL/NTSC Select Button
18. (TAPE 2) Record Pause Button
19. Function Selector Buttons
20. (VCD/CD) Random Button
21. (VCD/CD) Pause Button
22. (VCD) Skip/Next Button
(CD) Track Up/Cue Button
(TUNER) Preset Up Button
(TAPE 2) Fast Wind Button
23. (VCD) Play/Repeat/Select/Resume Button
(CD) Play/Repeat Button
(TAPE 1) Play Button
(TAPE 2) Forward Play Button
24. (VCD) Stop/Return Button
(CD/TAPE) Stop Button
25. Extra Bass Button
26. Equalizer Mode Selector Button
27. Volume Up/Down Buttons

RESETTING THE MICROCOMPUTER

Reset the microcomputer under the following condi-
tions:
To erase all of the stored memory contents (clock and
timer settings, and tuner and CD presets).
If the display is not correct.
If the operation is not correct.
1
Press the ON/STAND-BY button to enter the stand-
by mode.
2
Whilst pressing down the
DEMO button, hold down the ON/STAND-BY button
for at least 1 second.
"CLEAR AL" will appear.
1
Caution:
The operation explained above will erase all data stored
in memory including clock and timer settings, and tuner
and CD presets.
– 6 –
button and the X-BASS/
2