Final Assembly - lehman Trikes Renegade Installation Instructions Manual

Final Assembly

1. Install seat to fender using original H-D mounting hardware.
Note: Make sure insert in fender is free of paint before installing screw.
2. Install wheels. Torque wire wheel lug nuts to 75 ft.-lbs. and aluminum wheel lug nuts to 85 ft.-lbs.
Install center caps (if applicable).
Caution: Do not use an impact wrench when installing lug nuts.
3. Reflectors can be installed to body. See Fig. 1. Install rear reflectors 3" below taillights on body.
See Fig. 2. Install side reflectors using wheel center caps as a reference, 1/4" above wheel opening
on body.
Fig. 1 Fig. 2
34
1997-2001 FLH Renegade– Rev. 3