Table of Contents
Advertisement
Precautions
1-5 Pick-up disassembly and reassembly
1-5-1 Disassembly
1) Remove the power cable.
2) Switch SW1 on Deck PCB to "OFF" before
removing the FPC.
( Inserted into Main PCB MCN06. See Fig. 1-4)
3) Disassemble the Deck.
4) Disassemble the Deck PCB.
Note : If the assembly and disassembly are not done in correct sequence, the Pick-up may be damaged.
OFF
1-6
SW1
ON
1-5-2 Assembly
1) Replace the Pick-up.
2) Assemble the Deck PCB.
3) Reassemble the Deck.
4) Insert FPC into Main PCB MCN06 and switch SW1
on Deck PCB to "ON". (See Fig 1-4)
FPC
Fig. 1-4
TO MAIN PCB
(MCN06)
Samsung Electronics
Advertisement
Chapters
Table of Contents
