Samsung DVD-C600 Service Manual page 34

4-4 Deck
3-4-1 Tray Removal
CAUTIONS ;
1) When disassembling Deck Ass'y,
switch the SW1 to "OFF" on the Deck PCB and remove the FPC connected to MCN06 on Main PCB. (See Fig.1-4 on page 1-6)
2) When assembling Deck Ass'y,
insert the FPC into the MCN06 on Main PCB and switch SW1 to "ON" on the Deck PCB. (See Fig.1-4 on page 1-6)
1) Insert a Screw driver ´ into Emergency hole Œ and turn Gear Load ˇ in the direction of arrow "A".
2) When the Tray ¨ comes out a little, pull it in the direction of arrow "B" by hand.
3) Disconnect Flat Cable Ø.
4) Pull the Tray ¨ to disassemble, while simultaneously pushing the Stopper ˆ, in direction of arrow "C".
CAUTION ; Do not stain with grease Pick-Up Lens, Turn table, Roulette Disc, Tray Disc, Belt.
¨ TRAY DISC
Samsung Electronics
ˆ STOPPER
ˇ GEAR LOAD
"B"
Fig. 4-9 Tray Removal
"C"
Ø FLAT CABLE
ΠEMERGENCY HOLE
CLOSE
<Bottom View>
Disassembly and Reaasembly
"C"
ˆ STOPPER
´ SCREW DRIVER
"A"
OPEN
4-9