Table of Contents
Advertisement
Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows
Vista, Microsoft Windows 7, Microsoft Windows 8/8.1.
Installing the monitor driver in Windows Vista
To use the Plug and Play feature in Microsoft Windows Vista, do the following:
1.
Turn off the computer and all attached devices.
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow your computer to start the
Windows Vista operating system.
4. From the Lenovo website http://support.lenovo.com/LT2323pwA, find the
corresponding monitor driver and download it to a PC to which this monitor is connected
(such as a desktop).
5.
Click Start, Control Panel and then click the Hardware and Sound icon.
Click the Personalization icon.
6.
7.
Click the Display settings icon.
Click the Advanced Settings button.
8.
Click the Monitor tab.
9.
10. Click the Properties button.
11. Click the Driver tab.
12. Click Update Driver, then click Browse the computer to find the driver program.
13. Select Pick from the list of device driver program on the computer.
14. Click the Hard Disk button. By clicking the Browse button, browse and point to
the following path:
X:\Monitor Drivers\Windows Vista
(where X indicates "the folder in which the downloaded driver is located"
(such as a desktop)).
15. Select the "lenlt2323pwa.inf" file and click the Open button. Click the OK button.
16. In the new window, s elect LEN LT2323pwA and click Next.
17. After the installation is complete, delete all downloaded files and close all windows.
18. Restart the system. The system will automatically select the maximum refresh
rate and corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640
x 480 at a refresh rate of 60 Hz.
3-5
Chapter 3.
Hide quick links:
Advertisement
Table of Contents
