Table of Contents
Advertisement
4.
You will be asked to type in the admin user name and password. By default
this is username of "admin" and the password is "password". Then click the
"Sign In" button.
5.
This will bring up another page where you are able to see the current firm-
ware version on the Cirrus LT. You can then select the firmware file to upload
by clicking the "Browse" button. When you download the firmware file from
the NCS downloads page it will tell you the firmware version. Compare it to
the version already on the Cirrus LT. The new firmware should be newer than
the firmware already on the unit. You should never flash an older firmware
unless directed to by NCS.
6.
Click "Submit" to start the firmware upload process. This can take up to 5
minutes.
7.
Note: if you are updating a unit that is connected via wireless, you won't get as
much information back from the unit as you will if it is wired.
Cirrus LT User Manual-1.2-041715
75
Advertisement
Table of Contents
