Table of Contents
Advertisement
2.
3.
74
Once you know the IP Address of the Cirrus LT unit to upgrade, you need to
then go to the PC that you will be upgrading from. Ensure this PC also has the
latest firmware downloaded from the NCS downloads webpage. You can find
the downloads for the Cirrus LT by going to
http://www.ncst.com/content/downloads-0
and then selecting Zero Client as the type of download and then Cirrus LT
for Product.
Remember where you save this file, you will need to know this file location
later.
Open a browser on the PC and type the IP Address plus the port 8081 into the
address bar like this, https://<IP address>:8081
In the example shown below, it is https://192.168.2.146:8081
Cirrus LT User Manual-1.2-041715
Advertisement
Table of Contents
