Using This Guide - iBall Slide Octa-A41 User Manual

Using this Guide

This guide has been specially designed to guide you through the basics of your device, such as getting started with the device.
Please read this guide carefully before using your device to ensure safe and correct use.
The descriptions in this guide are based on the default settings of your device.
Please keep this guide for future reference.
Installing the SIM card and Storage card
You need to remove the cover on the left upper side of the device by ejector tool before you can install the SIM card and
storage card. Also, make sure to always turn off the power before installing or replacing the SIM card and storage card.
To remove the SIM card adapter:
1. Make sure your device is turned off.
3. Push by SIM card ejecting pin side until it disengages from the device and then pull it up to remove.
To install the SIM card
The SIM card contains your phone number, service details, and phonebook/ message memory. Your device supports both 3G
and 2G SIM cards.
1. Remove SIM card tray by SIM card ejector.
2. Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and its cut-off corner facing out the
card slot.
3. Push the SIM card completely into the slot.
Note:
• The phone supports Single Micro SIM card, it supports 3G networks.
• Some legacy SIM cards may not function with your device. You should consult with your service provider for a replacement of
SIM card. There may be some fees for this service.
To install the memory card
To have additional storage for your images, videos, music, and files, you can purchase a memory card and install it into your
device.
1. Make sure that your device is turned off, and then remove the SIM card tray.
2. Locate the memory card slot on the upper part of the exposed right panel.
3. Insert the memory card into the slot with its gold contacts facing down until it clicks into place.
Note: To remove the memory card, pull it to eject it from the slot.
Which class of SD card is supported on my device?
The word class is another term for speed. Different type of flash memory is used for different SD cards. This suggests that the
read/write speed of the SD card differs in different classes.
Class 2 SD card2 MB/sSD card recording
6