If you would like any additional information on or have any suggestions pertaining to this manual, please contact: SEEBURG acoustic line Produktions- und Vertriebsgesellschaft mbH Auweg 32 89250 Senden 07307 / 9700 – 0 www.seeburg.net...
TSM Sub dp+ in the close vicinity of intense heat sources and avoid direct sunlight. After several hours of operation the housing (especially all-metal parts such as the speaker stand flange and connection panel) can reach temperatures of up to 40° C. SEEBURG acoustic line...
230 VAC mains voltage is available. After switching on (clockwise rotation until it snaps into place), the system starts up and is ready for use within 3 seconds. Avoid continuous switching on and off, above all when • the system is under sustained load. SEEBURG acoustic line...
• least one amplifier channel. Signal LED: green light if a signal exceeds –20 dBU. This also applies • when the mute function has been activated: Power LED: lights up when the system is switched on. • SEEBURG acoustic line...
0 dB (standard), -3dB and –6 dB are available. Adjustment is effect via the SET button. The green LED located above it indicates which mode you are currently using, whereby the four vertically arranged LEDs (now green) indicate each value set. SEEBURG acoustic line...
TSM Sub, volume should be adjusted to 0dB. Lock function: If the SET and MODE buttons are simultaneously pressed for more than three seconds, the operational function is disabled. Press the buttons again in the same way to release the lock. SEEBURG acoustic line...
Need help?
Do you have a question about the TSM Sub dp+ and is the answer not in the manual?
Questions and answers