File Transfer Over Infrared; To Turn On Infrared Monitor Sounds; To Be Notified When Infrared Communication Is Interrupted - VSCOM IR-200S User Manual

File Transfer over Infrared

l
Point the VScom IrDA serial adapter at the Infrared Port on the other computer.
l
Both systems detect each other and connect.
l
The "Infrared Monitor" icon in the system tray on the Taskbar is activated.
l
Double-click on the "Infrared Recipient" icon in "My Computer". The "Infrared
Transfer" panel opens up and displays "One available Infrared device is within
range."
l
The connected Infrared device is shown in the panel.
l
To transfer file, click on the "Send Files..." button.
l
Locate the folder from "Look in" and select the files to be sent.
l
Click on the "Open" button.
l
The file is now transmitted to the other computer.
l
The received files in another computer are stored in "My Received Files" of
"Received Files".

To Turn on Infrared Monitor Sounds

1. Open the "Infrared Monitor" dialog box.
2. Click the "Preferences" tab.
3. Make sure "Play sounds before devices in range and interrupted
communication" is selected.
l
You can open the "Infrared Monitor" dialog box by clicking "Start", pointing
to "Settings", clicking "Control Panel", and double clicking "Infrared".
l
To turn off Infrared Monitor sounds, make sure "Play sounds for devices in
range and interrupted communication" is cleared.
l
If your computer has a sound card, you can double-click the "Sounds" icon
in "Control Panel" to change which sounds are assigned to Infrared
Monitor events.

To be Notified when Infrared Communication is interrupted

1. Click the "Infrared" icon on the taskbar.
2. Click the "Preferences" tab
3. Select "Play sounds when available devices come within range and when
communication is interrupted".
4