Table of Contents
Advertisement
Windows ME Driver Installation
1. Go to "Control Panel" and double click "Add New Hardware"
2. Click "Next" twice.
3. Select "No, I want to select Hardware from the list". Click on "Next".
4. Select "Infrared Devices", and click on "Next" twice.
5. The "Infrared Transceiver" lists show some options. Choose "Have Disk",
and click on "Next".
6. Insert the supplied driver disk, and type "A:\WinME".
7. The model "VScom IrDA serial adapter" is listed in "Add Infrared Device
Wizard ", then click "OK".
8. Windows will copy and install the driver for Vscom IrDA serial adapter.
9. Click on "Next" to select the COM port to which the infrared device is
connected physically.
10. Choose "COM1" or "COM2". Click on "Next".
11. Click on "Next" to set Infrared serial [COM] port and Infrared printer [LPT]
port.
12. Click on "Finish" to finish driver install.
13. Restart computer to complete installation.
Windows 2000 Driver Installation
1. Go to "Control Panel" and double click "Add New Hardware"
2. Click "Next" twice.
3. Select "Add a new device". Click on "Next".
4. Select "No, I want to select Hardware from the list". Click on "Next".
5. Select "Infrared Devices", and click on "Next".
6. The "Infrared Transceiver" lists show some options. Choose "Have Disk",
and click on "Next".
7. Insert the supplied driver disk, and type "A:\Win2000". Click on "Next".
8. The model "Vscom IrDA serial adapter" is listed in "Add Infrared Device
Wizard", then click on "Next" twice.
9. Windows will copy and install the driver for Vscom IrDA serial adapter.
10. Choose "COM1" or "COM2".
11. Restart computer to complete installation.
Click on "Next" to finish driver installation.
2
Click on "Next".
Advertisement
Table of Contents
Need help?
Do you have a question about the IR-200S and is the answer not in the manual?