Removing The Earphones; Detachable Cable; Maintenance And Cleaning; Cleaning The Nozzle - Shure SE846 Instruction Manual

Removing the Earphones

Grasp the body of earphone
and gently twist to remove.

Detachable Cable

You may need to detach the • Pull straight apart—do not
cable from the earphones to at- twist. Cable is a snap fit,
tach optional components or to not threaded.
replace the cable if it becomes
Note: If you pull at an
damaged. To prevent acciden-
angle, the connector will
tal separation, the connector
not detach.
has a snug fit. Take special
• Do not pull on the cable
care to prevent damage to the
or put any pressure on the
earphone and connector.
earphone nozzle.
• Do not use pliers or other
• Listen for a click when
tools.
connecting.
• Grasp the connector and
the earphone as close as
possible to where they join.
4

Maintenance and Cleaning

Note: Do not pull on cable to Careful maintenance ensures a tight seal be-
remove earphone. tween the sleeve and nozzle, improving sound
quality and product safety.
•
•

Cleaning the Nozzle

• When reattaching the
cable, match the "L" and
If you notice a change in sound quality, remove
"R" markings. For clear
the sleeve and check the nozzle of your ear-
cables and earphones,
phone. If nozzle is blocked, clear obstructions.
match the color dots
If no obstruction is found or if sound quality
(Red=Right, Blue=Left).
does not improve, replace the sleeve with a new
sleeve or disassemble the nozzle to clean inside.
Keep the earphones and sleeves as clean
and dry as possible.
To clean sleeves, remove them from
earphones, gently rinse in warm water and
air dry. Foam sleeves require a longer drying
time. Inspect for damage and replace if
necessary. Ear sleeves must be completely
dry before reusing.
• Wipe the earphones and sleeves with mild
antiseptic to avoid infections. Do not use
alcohol-based disinfectants.
• Do not expose earphones to extreme
temperatures.
• Replace sleeves if they do not fit properly.
• Do not attempt to modify this product. Doing
so will void the warranty and could result in
personal injury and/or product failure.
Caution: When cleaning, do not force any object
through the earphone nozzle! This will damage
the earphone sound filter.