Advertisement
Quick Links
Sound Isolating™ Earphones
Shure Sound Isolating™ Earphones, built with balanced armature speakers,
deliver a detailed soundstage free from outside noise. The powerful and
stylish Shure SE earphones come with a detachable cable, adapters, a
Choosing a Sleeve
Select an earphone sleeve that provides the best fit and sound isolation. It
should be easy to insert, fit comfortably, and easy to remove.
Wearing the Earphones
Wear them like earplugs. A good acoustic seal provides maximum bass.
1. Select a sleeve.
2. Twist and pull to remove. Push new sleeve on fully. Compress foam
sleeve slightly.
3. Insert firmly into ear. Wear cable over and behind ear. Tighten the cable
and take up slack by raising the cable cinch.
Important: If there seems to be a lack of low frequency response (bass),
this means that the earphone sleeve is not forming a tight seal. Gently push
the earphone deeper into the ear canal or try a different sleeve.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
Changing Sleeves
•
Twist and pull to remove the sleeve from the nozzle.
•
Slide on a new sleeve so that it completely covers the barb and the
nozzle.
Removing the Earphones
Grasp the body of earphone and gently twist to remove.
©2017 Shure Incorporated
durable carrying case, and interchangeable Sound Isolating sleeves for a
comfortable and personalized fit.
Soft Flex Sleeves: In small, medium, and large
sizes. Made from pliable rubber.
Soft Foam Sleeves: Compress the foam sleeve
between your fingers and insert into the ear canal.
Hold in place for about ten seconds while the foam
expands.
Triple-Flange Sleeves: If desired, use scissors to
trim the stem on the sleeve.
Wearing the cable over the ear and securing it behind the head can help
keep the earphones in place during physical activity.
Caution: If the barb or any of the nozzle is exposed, the sleeve is not prop-
erly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure
proper fit and performance, use only sleeves supplied by Shure (unless using
custom molded sleeves).
SE846-V AMEU
Shure Earphones
1/5
Advertisement
Related Manuals for Shure SE846-V
Summary of Contents for Shure SE846-V
- Page 1 Replace sleeves if they do not tightly grip the nozzle. To ensure • Slide on a new sleeve so that it completely covers the barb and the proper fit and performance, use only sleeves supplied by Shure (unless using nozzle. custom molded sleeves).
-
Page 2: Detachable Cable
SE846-V AMEU Shure Earphones Shure Incorporated Note: Do not pull on cable to remove earphone. Detachable Cable You may need to detach the cable from the earphones to attach optional Audible click when properly connected components or to replace the cable if it becomes damaged. To prevent acci- dental separation, the connector has a snug fit. - Page 3 SE846-V AMEU Shure Earphones Shure Incorporated Color Sound Signature Response Blue Balanced Neutral (as shipped) White Bright +2.5 dB, 1 kHz to 8 kHz Black Warm −2.5 dB, 1 kHz to 8 kHz Removing the Nozzle Note: The nozzle contains small parts. Choose a proper work surface before disassembly.
-
Page 4: Airline Adapter
Inline Attenuator The high sensitivity of Shure earphones means you get louder sound at a volume below the nominal level. Use the EA650 attenuator to reduce the typical listening level, and you might need to reduce the volume of your audio signal level at the earphone, so you can keep the source volume at a higher source on your media player or computer. -
Page 5: Specifications
Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: info@shure.de Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email: info@shure.com...