Lindy 32500 User Manual page 21

Wireless Projector Server
Using the Administrator Utility
The Administrator Utility consists of four sections that allow you to configure different settings.
After making changes you need to click on the Save button within each section and then click
Re-boot to reboot the Projector Server and make the changes effective. The exception is in the
password section; clicking Apply here changes the password immediately without the need to
reboot!
Log Out: Exits the Administrator Utility and returns to your previous web page
Re-boot: Closes the Administrator Utility and reboots the Projector Server to update changes
Change Password: Sets a new password to access the Administrator Utility. Click Apply to
save changes.
New Password - Enter your new password here (case sensitive)
Confirmation – Re-enter the password
System: Here you can change the Host Name (Network identification) and default language.
Click Save and Re-boot to save changes.
Host Name – Enter a new host name here
20
User Manual