Related Manuals for Lindy 32498
Summary of Contents for Lindy 32498
- Page 1 Wireless Projector Server User Manual English LINDY No’s. 32498, 32499 www.lindy.com © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (March 2008)
-
Page 2: Specifications
Wireless Projector Server 1. Introduction Thank you for purchasing the LINDY Wireless Projector Server. This innovative product allows you to connect to your projector for presentations via a Wireless LAN or Ethernet network. The LINDY Wireless Projector Server features both an IEEE 802.11g 54Mbps WLAN and a 10/100Mb Ethernet LAN connection for maximum versatility. -
Page 3: User Manual
3. Installation Connect the power cable to the power socket on the rear of the unit Connect the VGA cable from your Projector to the VGA connector on the rear panel Turn on your projector Turn on the Projector server •... - Page 4 4.2 Make sure your PC WLAN card is enabled in “network connections” in the Windows control panel 4.3 To connect your PC to the Projector Server, view your available wireless networks in the Windows Control Panel and double click the WPS option 4.4 Open a browser and enter the default IP address 192.168.100.10 or enter the IP...
- Page 5 Wireless Projector Server 4.5 When you have successfully logged in to the Projector Server you will see the screen below 4.6 Click Download on the left hand side and then click the Download box. You do not need to put a password in the box.
- Page 6 Wireless Projector Server User Manual 4.8 Enter the LOGIN CODE from the projector screen to start sending the display signal 4.9 Once you have input the correct “LOGIN CODE” the picture will show on the projector screen...
- Page 7 Projector Servers in range, a list of the available connections will appear. Please choose the Projector Server you would like to connect to: 5.2.4 If the Projector Server is not found then the option to reconnect will appear: 5.3 Button Function – Projector mode...
- Page 8 6.1 Home Page 6.1.1 Make sure your PC has connected to the box successfully 6.1.2 Open your browser and enter the IP address shown on the projector screen 6.1.3 The default IP Address is 192.168.100.10: Mute & volume slider control...
- Page 9 Wireless Projector Server 6.2 Conference Control This function allows you to host a meeting using the WLAN connection and without the need for constantly swapping a patch cable. 6.2.1 Once logged in, select the Conference Control function 6.2.2 Enter the password (the default password and username is “trainer”) and then press Login 6.2.3 After you have logged in successfully, you will see a list of users connected to...
- Page 10 Wireless Projector Server 6.3 Login Web Admin Click Admin and then enter the password (admin) to login to the system status page: 6.4 System Status Selecting System Status, shows the current system status Model Name: Product model name Versions: Firmware version no.: Product firmware version number...
- Page 11 Wireless Projector Server 6.5 Operating Mode IP Setup IP Address: The default value is 192.168.100.10 • Subnet Mask: The default value is 255.255.255.0 • Default Gateway: 192.168.100.10 • DHCP Server Setup – Can be Auto or Disabled Start IP: The starting IP address of the DHCP Server •...
- Page 12 To reset the Factory Default Settings via the hardware 6.8.1 Power off the Projector Server 6.8.2 On the rear panel, press and hold the Reset button and turn on the Projector Server 6.8.3 Continue to hold the Reset button for 10 seconds or more...
- Page 13 Warning: Don’t power off the Projector Server while the firmware upgrade is in progress, otherwise you will cause serious damage and the unit will need to be returned to LINDY for repair 6.9.6 Once the upgrade has finished a box will appear stating “update successful“...
- Page 14 Projector Server to replace the previous version. This will resolve any incompatibility issues Q2. My PC and Projector Server connection is established but the client utility can’t find the projector Server. A: (1) Check that the client utility software is not blocked by your Firewall software. If it...
- Page 15 CE/FCC CE Statement This device complies with the European Regulations for Electromagnetic Compatibility (EMC) of the European Union and it is equipped with the CE mark. This unit has to be used with high quality shielded connection cables. Only if these high quality shielded cables are used it can be sure that the EMC compatibility is not adversely influenced.
-
Page 16: Recycling Information
Stato quando si dispone di un apparecchio elettrico o elettronico. Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato. müssen den lokalen 2nd Edition march 2008 LINDY No. 32498 LINDY No. 32499 www.lindy.com...