Section 1. Brief Introduction - Locosys GW-52 Quick Start Manual

Section 1. Brief Introduction

Use the cable that comes along in the package to power
1.1
on GW-52 and charge it for at least 2 hours.
Touch MODE and select Time modes
1.2
(1) Clock; (2) Alarm; (3) Stopwacth; (4) Timer
Touch both ADJUST key and GPS key simultaneously to
1.3
enter GW-52 setting screen.
Touch both START key and GPS key to enter GPS mode
1.4
screen. Start searching for GPS...
(Auto Lock Enabled: If SPD GENIE value is none-zero)
START + MODE: Lock/Unlock key.
1.5
Center Key: Backlight on last 3 sec.
Battery Outline Flash: Device key lock
www.locosystech.com