Protecting Images
Protect important images to prevent accidental erasure by the camera
( = 116).
Choosing a Selection Method
1
Access the setting screen.
Press the [
z
[Protect] on the [
2
Choose a selection method.
Choose a menu item and an option as
z
desired ( = 30).
To return to the menu screen, press the
z
[
] button.
●
Protected images on a memory card will be erased if you format
the card ( = 154, = 154).
●
Protected images cannot be erased using the camera's erasure
function. To erase them this way, first cancel protection.
Choosing Images Individually
Still Images
Movies
] button and choose
] tab ( = 30).
1
Choose [Select].
Following step 2 in "Choosing a Selection
z
Method" ( = 114), choose [Select] and
press the [ ] button.
2
Choose an image.
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose an image, and then press
the [ ] button. [
] is displayed.
To cancel selection, press the [ ] button
z
again. [
] is no longer displayed.
Repeat this process to specify other
z
images.
3
Protect the image.
Press the [
] button. A confirmation
z
message is displayed.
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [OK], and then press the
[ ] button.
●
Images will not be protected if you switch to Shooting mode or
turn the camera off before finishing the setup process in step 3.
●
You can also select or clear images by touching the screen in
step 2, and you can access the confirmation screen by touching
[
].
●
You can also protect images by touching [OK] on the screen in
step 3.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
114