Connecting To The Monitor Output Terminal ( T); Connecting To The Component Video Input Terminal - Sony WEGA KV-SA282 Operating Instructions Manual

Connecting to the monitor output terminal ( T )
TV rear panel
c –
120W MAX 8

Connecting to the component video input terminal (

TV rear panel
c –
120W MAX 8
Notes
• If your DVD player can output interlace and progressive mode signals, select the interlace
output when connecting to
either 525i/60Hz or 625i/50Hz interlace signals.
• The component video terminals on your DVD player are sometimes labeled Y/C
P Y/C /C or Y/B-Y/R-Y.
R, b r
• If you select "DVD" on your TV screen, the signal from the T (monitor output) terminals will
not be output properly. This does not indicate a malfunction.
R L Y C
C
B R
1 3 4
R L Y C C
R
B
1 3 4
(component video input) on your TV. Your TV can receive
Audio/Video
cable
(not supplied)
Audio system
Component
video cable
(not supplied)
Audio cable
(not supplied)
Additional Information
VCR
)
DVD player
/C Y/P /
B R, B
continue
31