Safety Precautions; General Instructions; Applicable Standards - Valley Comfort Systems MP80 Operation & Installation Manual

Page 8

GENERAL INSTRUCTIONS

• BEFORE INSTALLING THIS APPLIANCE, CONTACT THE LOCAL BUILDING OR FIRE OR
OTHER AUTHORITY HAVING JURISDICTION AND FOLLOW THEIR GUIDELINES.
• THIS APPLIANCE MUST BE INSTALLED BY A QUALIFIED INSTALLER. FOLLOW THE
INSTALLATION DIRECTIONS. DO NOT OPERATE WITHOUT FULLY ASSEMBLING ALL
COMPONENTS.
• IF THIS APPLIANCE IS NOT PROPERLY INSTALLED, A HOUSE FIRE MAY RESULT.
• DO NOT EXPOSE THE APPLIANCE TO THE ELEMENTS (EX. RAIN, ETC.) AND KEEP
THE APPLIANCE DRY AT ALL TIMES. WET INSULATION WILL PRODUCE AN ODOUR
WHEN THE APPLIANCE IS USED.
• THIS APPLIANCE IS HOT WHEN OPERATED AND CAN CAUSE SEVERE BURNS
IF CONTACTED. CHILDREN AND PETS MUST BE KEPT FROM TOUCHING THE
APPLIANCE WHEN IT IS HOT.
• COMBUSTIBLE MATERIAL SUCH AS FIRE WOOD, WET CLOTHING, ETC. PLACED TOO
CLOSE CAN CATCH FIRE. OBJECTS PLACED IN FRONT OF THE APPLIANCE MUST BE
KEPT A MINIMUM OF 48"(1219 MM) FROM THE FRONT OF THE APPLIANCE.
• ALL WIRING SHOULD BE DONE BY A QUALIFIED ELECTRICIAN AND SHALL BE IN
COMPLIANCE WITH LOCAL CODES AND WITH THE CURRENT CSA C22.1 CANADIAN
ELECTRIC CODE.

APPLICABLE STANDARDS

Certifi cation Standards and Installation Codes:
UL391-2010
UL 1995-2005/CSA C22.2 NO .236-05
CSA B-139-10
CSA B-365-10
CSA B-366.1-11
OM-MP80 E V1.15

SAFETY PRECAUTIONS

MP80
January 29, 2015