System Configurations; Operation To Reset; Note Related To Transportation And Movement; Accessories / Cautions - Kenwood RXD-M66-H Service Manual

RXD-M66/LS-M66
QQ
3 7 63 1515 0
Attention
Please contact our KENWOOD Service Department in your side if you want the service information; Circuit Description. Full
Described Parts list and so. Information is available to you by internet from us. On circuit description, refer to RXD-M55.
Accessories
AM loop antenna (1)
(T90-0893-05)
Batteries (R6/AA) (2)

System Configurations

SYSTEM RECEIVER
HM-636-H RXD-M66-H
HM-636-N RXD-M66-N
HM-636-S RXD-M66-S
TE HM-636IT-H RXD-M66-H
L 13942296513
HM-636IT-S RXD-M66-S
Cautions

Operation to reset

The microcomputer may fall into malfunction (impossibil-
ity to operate, erroneous display, etc.) when the power
cord is unplugged while unit is ON or due to an external
factor. In this case, execute the following procedure to
reset the microcomputer and return it to normal condi-
tion.
÷ Please note that resetting the microcomputer clears
the contents stored in and it returns to conditio n
when it left the factory.
Unplug the power cord from the power outlet, then
while holding the POWER or
the power cord again.
After resetting the microcomputer, the display will show
as follow:
www
The marking of products using lasers
The marking of this product has been classified as Class 1. It means
that there is no danger of hazardous radiation outside the product.
Location: Back panel
2

ACCESSORIES / CAUTIONS

Remote control unit (1)
(A70-1568-05): EE1E2
(A70-1569-05): M1X1X2
FM indoor antenna (1)
(T90-0877-05)
SPEAKER
LS-M66-H
LS-M66-N
LS-M66-S
LS-M66IT-H
LS-M66IT-S
key depressed, plug
or
x ao
y
. i
CLASS 1
LASER PRODUCT
8
AC Plug Adaptor (1)
(E03-0115-05)
Q Q
3 6 7 1 3

Note related to transportation and movement

Before transporting or moving this unit, carry out the follow-
ing operations.
1 Remove the CD from the unit.
2 Press the CD 6 key.
3 Wait for some time and verify that the display
appears as above.
4 Wait a few seconds and turn the unit OFF.
u163
(For countries other than U.S.A., U.S.-Military and Canada)
.
VISIBLE LASER RADIATION
WHEN OPEN. DO NOT STARE
INTO BEAM OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS.
Inside this laser product, a laser diode classified as Class 3A laser
radiation is contained as alerted by the internal caution label shown
above. Do not stare into beam or view directly with optical instruments.
2 9 9 4 2 8
Use to adapt the plug on the
power cord to the shape of the
wall outlet.
(Accessory only for regions where
use is necessary.)
1 5 0 5 8 2 9 9 4
m
co
CAUTION
9 9
2 8 9 9