GE 11081 User Manual page 8

4. Once found, Choose "GE
Audio Receiver" and Enter
"0000" if asked for a PIN
(some devices do not require
a PIN).
Notes:
1. Once paired, the blue LED light on the GE Audio Receiver will flash once. The blue LED will stay
ON when a connection is established, and the connected device is in range.
2. Some devices, such as smartphones, will auto-connect after pairing, so the LED will be ON
immediately. Other devices, such as an Ultrabook, may ask to connect first (the LED will be OFF
until a connection is established).
5. Once paired, the GE Au-
dio Receiver should move
to the Paired devices
section of the Bluetooth
settings. You are now
connected to the "GE
Audio Receiver" and can
begin to enjoy your music
wirelessly.
6