Motorola StarTAC 160 Service Manual page 27

StarTAC 160 (GSM)
Antenna Removal
Step 1. Turn off the telephone.
Step 2. Press down on the battery's
tab and remove the battery
from the housing.
Step 3. Use the antenna tool to
remove the antenna.
Place the wide tip of the
antenna in
opening of the antenna tool.
Put the bottom of the tool
on the grooves in the base of
the antenna.
Turn counterclockwise until
the antenna is free from the
phone housing.
When
recommended
10 inch-pounds.
20
the large
re-assembling,
torque is
Issue 1.0 2/6/98