Testing; Verification - Motorola StarTAC 160 Service Manual

Cellular Subscriber Sector

Testing

Verification
Introduction
To test the StarTAC cellular telephone for
functional verification, the following equip-
ment will be required:
• GSM compatible
analyzer.
• Antenna test
5880348B33), and
connectors.
• Test Mini SIM card.
• Charged battery pack.
© 1998 Motorola, Inc.
communications
adaptor (Part No
appropriate cable/
Equipment Configuration
Initially insert the test Mini SIM card into
the slot at the side of the personal cellular
telephone. If required, further information
on Mini SIM card insertion is available on
page 8. The telephone's antenna should now
be removed, see "Disassembly" on page 19
for further details. When the antenna has
been removed, attach the antenna adaptor to
the unit. Slide a charged battery on to the
back of the personal telephone, so that the
telephone can be powered up. Finally,
connect a cable from the antenna connector
to the RF in/out port of the communications
analyzer, and power both the analyzer and
personal telephone on. The equipment set
up shown in Figure 6: "Testing Configura-
tion" should now be in place.
Issue 1.0
TESTING
StarTAC 160 (GSM)
11