Connecting To A Tv; Connecting To An Amplifier/Receiver - Panasonic DMP-BDT260 Operating Instructions Manual

Connecting to a TV

Connections and settings
Connect the AC mains lead after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC power.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic's HDMI cable. When outputting 1080p signal, please use
HDMI cables 5.0 meters or less.
[Except[the[United[Kingdom[and[Ireland] The HDMI-compliant cable is supplied with this unit.
[For[the[Middle[East[and[South[East[Asia]
2 AC mains leads are supplied.
Use the AC mains lead that matches the socket for the area you live in.
≥ Saudi Arabia: 3-pin AC mains lead
≥ Thailand: With a label
≥ This unit consumes a small amount of AC power (
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.

Connecting to an amplifier/receiver

([Except[the[United[Kingdom[and[Ireland] supplied)
≥ Set "Digital Audio Output" (
≥ [BDT260] [BDT161] [BDT160] When connecting to a non-3D compatible amplifier/receiver, connect this
unit to a TV, then connect the TV and the amplifier/receiver. Please note, however, that the audio can
only be up to 5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of "(ARC)"
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV's sound through the amplifier/receiver.
10
SQT0126
HDMI cable
([Except[the[United[Kingdom[and[Ireland] supplied)
AC mains lead (supplied)
HDMI cable
HDMI IN
Amplifier/receiver
24).
HDMI IN
To a household mains socket
31) even when turned off in standby mode. For
HDMI cable
HDMI OUT
(ARC)
HDMI IN
(ARC)