Inserting Or Removing Media - Panasonic DMP-BDT260 Operating Instructions Manual

Firmware updates
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
Firmware Update
New Version: X.XX
Current Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Yes
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, "FIN" will be
displayed on the screen. Unit will restart and the
following screen will be displayed.
The firmware has been updated.
: x.xx
Current Version
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (
"Firmware Version Information")
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set "Automatic Update Check" to "Off". (
No
OK
RETURN
RETURN
27,
27)
Inserting or removing
Playback
media
[For[the[Middle[East,[South[East[Asia[and[India]
USB1 USB2
Notes
≥ When inserting a media item, ensure that it is
facing the correct way, which is the right side
facing up.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
[For[the[Middle[East,[South[East[Asia[and[India]
≥ When you connect a USB HDD, use the left
USB port (USB1).
CAUTION
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened,
and this may cause malfunction.
13
SQT0126