Precautions When Working With Batteries; Appendices A; Dip Switch; Tune Vr - Innovative Energies YK-PSW122KVA User Manual

Pure sine wave inverter yk- psw2kva series
Table of Contents

Advertisement

6-2 Precautions When Working with Batteries

6-2-1 If battery acid contacts skin or clothing, wash immediately with soap and water.
If acid enters eye, immediately flood eye with running cold water for at lease 20minutes
and get medical attention immediately.
6-2-2 NEVER smoke or allow a spark or flame in vicinity of battery or engine.
6-2-3 Do not drop a metal tool on the battery. The resulting sparks or short-circuits on the
battery or other electrical part may cause an explosion.
6-2-4 Remove personal metal items such as rings, bracelets, necklaces, and watches when
working with a lead-acid battery.
A lead-acid battery produces a short-circuit current high enough to weld a ring or the like
to metal, causing a severe burn.

7. Appendices A

7-1. Dip Switch (at the left side of inverter)
S1
FREQ. (Hz)
ON
OFF
----
----
S1: Freq (Hz)
S2/S3: Baud Rate
When you set up S1~S3, please reset the inverter and let update data through CPU.

7-2 Tune VR

Tune VR (VAC) output voltage from 100
The VAC value will gradually increase if tune VR from right to left.
RE-MARK:
The user manual is subject to change without notice.
Innovative Energies Ltd. 1 Heremai Street, Henderson NZ. Tel: +64 9 835 0700. info@innovative.co.nz. www.innovative.co.nz
S2
60
ON
50
OFF
----
ON
----
OFF
S3
BAUD RATE
ON
2400
ON
4800
OFF
9600
OFF
19200
120 VAC or 200
16
ACV-ADJ
H--------L
240V
200V
H--------L
120V
100V
----
----
240 VAC

Advertisement

Table of Contents
loading

Table of Contents